PP PE ABS Sheet bɔli Masini .

PP (poliporopilɛn), PE (poliɛtitilɛn), ABS (acrylotrile styrene copolymer) sɛbɛnfura.

O fɛn saba nunu bɛɛ ka ca kosɛbɛ green-purpose plastikiw la, nka u ka baarakɛcogo cogoyaw n’u ka fɛnw baarakɛcogo tɛ kelen ye, o la, dilan yɔrɔ be ni fɛn kɛrɛnkɛrɛnninw ye ani a be dilan cogo kɛrɛnkɛrɛnnin na minan kɛrɛnkɛrɛnninw kama.

 

Core lajɛli: Duniɲa kuru bɛɛ ka poliolefin/ɛntinɛtiri .

PP PE ABS sɛbɛn bɔli masinw be ɲɔgɔn bɔ kosɔbɛ minanw lɔcogo la, a ka ca a la, u be basigi "sɛrɛkili kelen bɔli kan"T- min be i n'a fɔ, o be i n'a fɔ a kungolo be yɛlɛma". Dilanyɔrɔ labɛncogo be yɛlɛma ka kɛɲɛ ni minan ka yɛlɛmani cogoyaw ye (i n’a fɔ yɛlɛmani fanga, nɔgɔya, nɛnɛbɔlan) ani fɛn labanw ka laɲiniw (i n’a fɔ a ka bon, a ka yɔrɔ gloss, ani n’a be kɛ ka funteni dilan).

 

 

 

 

 

PP, PE, ABS Sheet Production Lines .

Jogo PP (polipropilɛn) sɛbɛnfura PE (poliɛtitilɛn) sɛbɛnfura ABS (plastiki min be nɛgɛ yɛlɛma) .

Fɛɛn jɔnjɔnw ye dumunifɛnw, tasaw, dosiyew, tasa minw be se ka bɔ ni izinibaarafɛnw ye, jimanfɛnw{0}} minw tɛ se ka kɛ, yɔrɔ latangabagaw, pibilisitɛriw, firizidɛriw, mobili kɔnɔyɔrɔw, tulonkɛfɛnw, nɛgɛw, nɛgɛw.

 

Minɛnw cogoyaw: yɔrɔ min ka yɛlɛma ka bon (~165 degere ), a ka yɛlɛmani fanga hakɛ, a ka nɔgɔ, a ka nɔgɔ, a ka baarakɛcogo ka bon, a ka nɔgɔ kosɔbɛ, a ka nɔgɔ, a ka nɔgɔ, a ka nɔgɔ ka tɛmɛ (~200-240 degere ), a ka nɔgɔ ka jigi, a ka nɔgɔ ka tiɲɛ.

A ka c’a la, a ka ca a la, a ka ɲi ka kɛ (n’a ma kɛ ko a be se ka kɛ kalandenw ye) ani u tɛ wajibi ye pewu! Dehumidification ani jalanw ka kan ka kɛ walisa jii ka nɔgɔ bali ka fara a kan ani ka bubblew kɛ fɛn sanfɛla la.

 

The characteristics of the extruder are that the screw L/D (length to diameter ratio) is generally above 25:1, and the compression ratio of the mixed shear section screw should not be too large to prevent overheating. The screw L/D should be large (usually>28:1), ani sɛrɛkili man kan ka fanga sɔrɔ kojugu fɔɔ ka se ka ABS tiɲɛni bali.

 

Funteni hakɛ min be sɔrɔ (200-230 degere ) ka se hakɛ dɔ ma min ka bon (180-220 degere )

Funteni saba nunu ka funteni hakɛ ka ca. Funteni min ka ca, o ka kan ka kɛ walisa ka kɔnɔnakow dɔgɔya ani ka yɛlɛmani bali kɔfɛ. Hakɛ. O min ka ɲi ka kɛ ka tɛmɛ tɔɔw bɛɛ kan. A ka ɲi ka kɛ ko funteni hakɛ ka ca walisa ka yɔrɔ nɔgɔman sɔrɔ ani ka kɔnɔnakow dɔgɔya.

Nɛnɛ ka ɲi ka kɛ cogo min na, o be se ka nɛnɛ ani ka sumaya dɔɔni dɔɔni walisa ka kristalizasiyɔn ni yɛlɛmani dɔgɔya. O la, a ka ɲi ka nɛnɛ bali ka se ka yɛlɛma. O la, a ka ɲi ka nɛnɛ.

 

Rolling be se ka kɛ ka sɛbɛnfura misɛnninw sɔrɔ wala k’u fara ɲɔgɔn kan ka kɛ ni drapo gwilimanw ye. A ka c’a la, u be sɛbɛw nɔrɔ ɲɔgɔn na cogo tilennin na, k’a sɔrɔ sɛbɛnin misɛnninw be se ka yɛlɛma.

O la, a be se ka kɛ ko a be se ka kɛ ko a be se ka suma ani ka yɛlɛma yɛlɛma. そのような結果は,結果の結果の結果を受けています。 N’an be baara kɛ n’a ka yeelenba ye, fani minw ka bon, u be se ka dilan. Aw ka ja ani ka baara kɛ ni funteni fitinin ye, o lo kɔrɔtanin lo ka se ka kɛ ka ɲɛ.

 

 

PP PE ABS sɛbɛ dafanin dɔ be yen min be sɔrɔ yɔrɔ nunu na:

1. Ka minanw dilan cogo la .

·ABS kɛrɛnkɛrɛnnin: Dehumidification ye minɛn nafaman ye. ABS nɛgɛw ka jimanya hakɛ ka kan ka dɔgɔya ka kɛ .<0.02% -0.03%.

·PP/PE: A ka ca a la, a ka ca a la, a ka kan ka kɛ ko a be se ka yɛlɛma (a fiɲɛ kalaman) dɔrɔn lo mako be yen, kɛrɛnkɛrɛnniya la, a ka kan ka fɛnw kalaya ka ɲɛ ani ka jii nɔgɔ bali. Ka se ka kɛ ko a ka ca kojugu-ɛn, PP be se ka kɛ fana ka dehumidification ni ja.

· Vacuum feeraer: A be fɛnw ta ka bɔ fɛnw la minw be bɔ bɔrɔw kɔnɔ ka taga n’u ye fɛnw jalan kan wala hopper min be bɔ.

 

2. Ɲɛfɔli sisitɛmu .

· Crew extrader: Nin ye fɛn ye min ka bon ni bɛɛ ye ani min ka sɔrɔko ka ca.

·Screw dilan: I ka visi sifa caaman sugandi (compression ratio, ɲagamifɛnw) minw basiginin lo minan suguya caaman kan.

·PP/PE: Ka baara kɛ ni diɲɛ bɛɛ ka visiw ye walima ni visi ye ni barikada yɔrɔw ye, a be se ka yɛlɛma ani ka ɲagami ɲɔgɔn na.

·ABS: Ka baara kɛ ni sɔgɔlan dɔgɔman ye, ka yɛlɛma dɔɔni dɔɔni walisa ka kalaya ani ka tiɲɛni bali.

· Sanga ni diamɛtiri hakɛ (L/D): a ka ca a la, 25:1 ni 32:1 cɛ, L/D ka bon, a be yɛlɛma ka ɲɛ, ani a be se ka kɛ ka kɛɲɛ ni funteni hakɛ ye.

·Screen yɛlɛma: yɛlɛmani min be kɛ tuma bɛɛ wala min be kɛ bolo la walisa ka nɔgɔw sɛgɛsɛgɛ yɛlɛmani kɔnɔ ani ka fɛɛnw ɲumanya sabati.

· Ka se ka pɔnpe (o ye fɛɛrɛ ye): Ka se ka baara kɛ ka ɲɛ-ɛn, ka pɔnpe dɔ fara a kan min be yɛlɛma, o be se ka bɔli fanga basigi kosɔbɛ ani ka fɛɛnw sɔrɔ minw be se ka muɲu ka ɲɛ.

·T- ye die kungolo (flat diman kungolo) yɛlɛma:

·Labɛncogo min be kɛ, o ye konfiguration ye, k’a to a ka yɛlɛma ka kɛ yɔrɔ kelen ye.

· dawolo dakun be ni yɛlɛmani ɲuman ye (a ka ca a la, a ka ca a la, a be se ka yɛlɛma wala a be se ka yɛlɛma cogo ɲuman na.

 

3. Ka tila ani ka nɛnɛ .

·Three roll gradinder: o ye fɛn ye min be dilan yɔrɔ la.

·Falan: Flatten, a cogoya, a be se ka yɛlɛma, ani a be gloss (mite roller) wala a ka yɔrɔ (min be yɛlɛma) ka taga n’a ye nɛgɛdaga kɔnɔ.

·Tiɲɛn kɔlɔsili: O ye yɛlɛmani paramɛtiri jɔnjɔn ye min be se ka kɛ ka baara kɛ ni minan suguya caaman ye. O yɔrɔ kelen kelen bɛɛ ye yɔrɔ ye min be se ka kɛ ko “tulu kalaman” wala “jii be yɛlɛma”, ani a be se ka kɛ ± degere 1 C ye.

·PP: Ɲimikalaya hakɛ min ka kan ka kɛ, o ka ca dɔɔni (i n’a fɔ degere 60-100 C) walisa ka dɔ bɔ a ka dɔgɔya kɔfɛ.

·ABS: O yɛlɛmani ka ca (i n’a fɔ. 80-110 degere C) be kɛ ka yɔrɔ dɔ sɔrɔ min ka bon.

·Cooling traction kaare: Fɛɛn min dilanna ka kɔn, n’o ye nɛgɛ saba ye, o be don nɛnɛbɔlan caaman kɔnɔ ani a be nɛnɛ tugun ka kɛ so kɔnɔ funteni hakɛ ye.

 

4. Dɛmɛ ani yɛlɛmani .

·Sɛbɛnni min be kɛ ɛntɛrɛnɛti kan (beta ray walima infrarouge): Wagati yɛrɛ yɛrɛ la, a be sɛgɛsɛgɛri kɛ ani a be se ka yɛlɛma yɔrɔ bɛɛ la, o min ye minan jɔnjɔn ye min be se ka kɛ sababu ye ka mɔgɔw ka ɲumanya n’u ka sɔrɔ caya. A be se ka jɛn ni dawolo yɛlɛmani fɛɛrɛ ye walisa ka se ka sɛgɛsɛgɛri kɛ a yɛrɛ ma (ATC).

·Edge tigɛ minɛn: Aw be gɛrɛnw tigɛ minw tɛ bɛn ɲɔgɔn ma fan fila bɛɛ la.

·Trakitɛri ani baarakɛla:

· Ka PE ni PP/ABS sɛbɛnw misɛnmanw ta, u be baara kɛ ni mansin dɔ ye min be se ka yɛlɛma yɔrɔ dɔ la.

·For thick PP/ABS sheets (such as>2mm), i ka baara kɛ ni tigɛlan dɔ ye min janya be yɛlɛma ani a be se ka kɛ i n’a fɔ a be kɛ cogo min na walisa ka sɛbɛw tigɛ ka ɲɛ ani k’u nɔrɔ ɲɔgɔn na.

 

5. Ka minanw labɛn kokura .

· O yɔrɔnin bɛɛ, a be se ka kɛ ko a be se ka yɛlɛma yɛlɛma ɛntɛrɛnɛti kan, ani o kɔ, a be yɛlɛma kɔfɛ ka kɛ fɛn ye min be bɔ ka taga n’a ye ka kɛɲɛ ni dumuni yɛlɛmani ye, o be dɔ bɔ musakaw la.

 

 

Modɛli yira	(mm) Sɛnɛfɛnw bonya	(mm) Fɛɛnw bonya be kɛ	(kw) Fanga fanga	(kg/h) See
SJ90/33	0,15-2mm	600-800mm	75kw	150-200kg/h
SJ120/33	0,15-2mm	800-1200mm	110kw	200-350kg/h
SJ135/33	0,15-2mm	1000-1600mm	132klw	300-450kg/h
SJ150/33	0,15-2mm	1500-2200mm	160kw	400-550kg/h

 

Tagasogow: pp abs drap bɔli masin, Sinuwaw ka pp pe abs bɔli masin dilanbagaw, feerekɛlaw, izini .